NSEP 2026 Question Paper with Answer Key and Solutions
NSEP 2026 Question Paper with Answer Key and Solutions
All 60 questions from the NSEP 2026 paper, with the answer key and step-by-step solutions.
What is NSEP?
NSEP is the National Standard Examination in Physics, the first stage of the Physics Olympiad programme in India, conducted by the Indian Association of Physics Teachers (IAPT). Students who qualify go on to INPhO (Stage 2), then the Orientation Cum Selection Camp, and finally the International Physics Olympiad (IPhO) team.
The NSEP 2026 paper was held on 22 November 2026 from 8:30 AM to 10:30 AM. This blog carries Question Paper Code 63, with all 60 questions, the answer key, and a short step-by-step method for every question.
| Item | Detail |
|---|---|
| Exam | NSEP 2026 (National Standard Examination in Physics) |
| Conducted by | Indian Association of Physics Teachers (IAPT) |
| Date and time | 22 November 2026, 8:30 AM to 10:30 AM |
| Question Paper Code | 63 |
| Questions | 60 |
| Duration | 120 minutes |
| Total marks | 216 |
| Part A-1 (Q1 to Q48) | Single correct option; +3 for correct, -1 for wrong |
| Part A-2 (Q49 to Q60) | One or more correct options; 6 marks only when all correct options are marked; no negative marking |
| Eligibility | Classes X, XI and XII |
| Next stage | INPhO on 31 January 2027, 9 AM to 12 noon |
A note on negative marking: the paper itself says Part A-1 carries minus 1 for a wrong answer, while the IAPT portal FAQ says there is no negative marking unless otherwise notified by IAPT. Both are stated here as printed; the official IAPT answer key will settle the scoring.
How to use this quiz: attempt the paper timed, without looking at the methods. Click an option to check it instantly. On Part A-2 questions, select all the options you think are correct and press Check Answer.
Read the method only after answering, and log every miss by topic. One question (Q37) is shown as a note: the published key and its own solution disagree on it, so no key is claimed for that card.
Download NSEP 2026 PDFs
Download the full NSEP 2026 question paper (Code 63) and the step-by-step solutions as PDFs.
Question Paper
All 60 questions from the NSEP 2026 paper, Code 63, held on 22 November 2026.
Download NSEP 2026 Question Paper (PDF)Solutions
Answer key with a short step-by-step method for every question.
Download NSEP 2026 Solutions (PDF)Part A-1 Questions (48) - Single Correct
A spherical bob of mass 0.20 kg and diameter 2.0 cm, having uniform density, is attached to the end of a string of length 100 cm. This pendulum so formed is suspended from the ceiling of an elevator. The elevator is moving upward with an acceleration of 5.4 ms-2 along an incline which makes an angle of 60 degree with vertical. The pendulum is made to oscillate about its mean position. Assuming that there is no aerial friction, the time period of oscillation of the pendulum is (given that acceleration due to gravity is 9.8 ms-2)
When light is incident on an interface between two media at an angle greater than θc = sin-1(1/μ) (where μ is the relative refractive index of the two media), it is totally reflected, a phenomenon known as total internal reflection. If the angle of incidence is smaller than θc light is partly reflected and partly refracted. A ray of light incident, parallel to the base, on a 30° - 90° - 60° prism, as shown, suffers two total internal reflections before emerging parallel but reversed in direction. The condition on the critical angle for this to be possible is: Figure: a right-angled prism ABC with the right angle at B, 60° at A and 30° at C. A ray of light comes from the right, parallel to the base BC, and strikes the hypotenuse AC.
A moving coil galvanometer has a coil with 175 turns and area 1 cm2. It uses a torsion band of torsion constant 10-6 Nm/rad. The coil is placed in a magnetic field B parallel to its plane. The coil deflects by 1° for a current of 1 mA. The value of the magnetic field B (in Tesla) is approximately
The figure shows an arrangement of charges [-2q at O (0, 0), +q at A (a, 0) and +q at B (-a, 0)]. The electric field E at point P (r, 0) can be expressed as (for r >> a) E = (1/4πε0)(αQ/rn) r̂ (where Q = qa2). Choose the correct option. Figure: on the x-axis, a charge +q at B (-a, 0), a charge -2q at O (0, 0), a charge +q at A (a, 0), and a point P (r, 0) to the right.
Charge Q coulomb is uniformly distributed throughout the volume of a solid hemisphere of radius R meter. The potential at the centre 'O' of the hemisphere in volts is Figure: a solid hemisphere of radius R with its centre marked O at the centre of the flat circular face.
The rear surface of an equi-concave lens of radius of curvature R and refractive index μ has been silvered; the lens behaves as a mirror. The focal length and the nature of the resulting mirror are Figure: an equi-concave (biconcave) lens with its rear surface silvered, shown shaded on the right side.
In Millikan's oil drop experiment, a charged drop falls vertically down with a terminal velocity v. If an electric field E is applied vertically upward, it moves with terminal velocity 2v in the upward direction. If the electric field reduces to E/2 then the terminal velocity of the drop becomes
Seven equal positive charges of magnitude q each are placed at the seven corners of a cube of side l. The force experienced by a charge Q placed at the centre of the cube is (given 1/4πε0 = K)
The magnetic moment (pm) and the moment of inertia (I) of a magnetic needle are pm = 8.7 × 10-2 A.m2 and I = 11.5 × 10-6 kg.m2 respectively. The magnetic needle performs 10 complete oscillations in 6.70 s when suspended in a uniform horizontal magnetic field B. The magnitude of the magnetic field is
The resistance between the points A and B in the infinite circuit shown, in terms of R, is Figure: an infinite ladder network. The top rail has resistors R, 2R, 4R, 23R and so on in series, the bottom rail has the same, and shunt resistors R, 2R, 4R, 23R and so on join the two rails, continuing to infinity. Terminals A and B are at the left end.
Work function of metal A is equal to the ionisation energy of the hydrogen atom in the first excited state. Work function of metal B is equal to the ionisation energy of singly-ionised helium atom in the second orbit. Photons of the same energy E are incident on the two metals A and B. Maximum kinetic energy of photoelectrons emitted from metal A is twice that of the photoelectrons emitted from metal B. The value of the photon energy E is
During an excavation in the ancient volcanic caves, an archaeologist discovered a sample of a rare mineral trapped inside a sealed rock chamber. Laboratory analysis of the sample showed that the mineral originally contained a radioactive isotope X, which decays into a stable element Y. The radioactive isotope has a half-life T = 104 year. Due to contamination from underground water, 20 % of the stable element got washed away before the sample was analysed. At the time of the analysis, the ratio of remaining (undecayed) radioactive isotope X to stable element Y in the sample is found to be 1 : 5.6. Assuming that no radioactive material X was lost from the sample, the archaeologist claimed that the actual age of the rock is
Two identical particles of mass m each are moving in circular orbits under a central potential given by V(r) = Krn, where K is a constant. If the radii of their orbits are r1 and r2 while the time periods are T1 and T2 respectively, the correct mathematical relation is
The figure represents a voltage regulator circuit using a zener diode. The breakdown voltage of the zener diode is 5.5 V and the load resistance is 5 kilo ohm. The series resistance R is 1 kilo ohm. If the battery voltage varies from 8 V to 14 V then what is the minimum and maximum value of current through the zener diode? Figure: a voltage regulator circuit. A battery feeds a series resistor R = 1.0 kΩ, after which a zener diode and the load resistor RL = 5.0 kΩ are connected in parallel.
Two coherent electromagnetic plane waves, of exactly equal amplitude, propagating with a very small angle of divergence ψ, fall almost normally on a distant screen to produce interference fringes with a separation (fringe width) x = 1.0 mm between neighbouring maxima. The wavelength of light is λ = 6000 Å. The angle of divergence ψ
In a line-of-sight radio communication, there is a distance of about 50 km between transmitting and receiving antennas. If the height of the receiving antenna is 70 m, then the minimum height of the transmitting antenna should be (Radius of the Earth = 6400 km)
In an arrangement, three polarisers P, Q and S have been set up in sequence such that transmission axis of S is crossed with respect to that of P. The transmission axis of Q is inclined at 60° to the transmission axis of S. When a beam of unpolarised light of intensity I0 is incident on P, the intensity of light transmitted by the three polarisers in succession is I. The ratio I : I0 is equal to
A solid sphere of mass m and radius R rolls without slipping on a horizontal surface. It collides with a light spring of stiffness constant K with kinetic energy E. If the surface under the spring is smooth (frictionless), then the maximum compression of the spring is
When a mass of 9.0 kg is suspended vertically from the free end of the wire of a sonometer, it resonates with a given tuning fork forming standing waves with five antinodes between the two bridges. When the 9.0 kg mass is replaced by another unknown mass M, the wire resonates with the same tuning fork forming three antinodes for the same positions of the bridges. The mass M is
A thin rectangular metal plate of surface area 0.1 m2 is placed on a large horizontal table. There are a few drops of a liquid between the metal plate and the table forming a thin liquid layer of 0.3 mm thickness. The plate is pulled horizontally with the help of a string passing over a massless and frictionless fixed pulley. When a mass of 10 g is attached to the vertically hanging free end of the string, the plate is observed to move gently towards the pulley with a constant speed of 8.5 cms-1. The coefficient of viscosity of the liquid is approximately
In an experiment for determination of the focal length of a thin convex lens, the object distance is measured as 15 cm with 1% error and the image distance is measured as 30 cm with 2% error. From the given data, the focal length of the lens is estimated with n% error. The value of n is
The Earth is revolving around the Sun in a circular orbit with a period of revolution equal to 1 year. Suppose that during its motion around the Sun, the mass of the Sun doubles suddenly, the time period of revolution of the Earth will then become
Three metallic wires form an isosceles right-angled triangle AOB with wire AB parallel to x-axis and the vertex O at the origin. The length of the wire OA = length OB = 2√2 m. A current of 10 A flows in the loop along OABO. A magnetic field B = 2.5(î - k̂) T exists in the region y ≥ 1. The force acting on the triangle due to this field is Figure: an isosceles right-angled triangle AOB with the vertex O at the origin and the right angle at O. The wire AB is horizontal at the top, and current flows along O to A to B to O, as shown by arrows.
A spring is in a compressed state under the action of a constant force P. Compression of the spring is d. Suppose direction of the force is reversed suddenly with its magnitude changed to 2P; the maximum extension of the spring will now be Figure: a spring fixed to a wall on the left. The upper diagram shows the spring at its natural length; the lower diagram shows it compressed by a distance d under a constant force P acting to the left.
In a process, one mole of a monoatomic gas is heated from initial temperature 27°C, in such a way that its molar heat capacity is constant equal to 2R. During the process, volume of the gas is doubled. The final temperature of the gas becomes
When placed in a liquid of density d1, a solid sphere sinks displacing a volume V of the liquid. When placed in a second liquid of density d2, the same sphere floats with half of its volume appearing over the surface of the liquid. When placed in a third liquid of density d3, the same sphere floats with 14th of its volume over the surface of the liquid. The buoyant force exerted by the liquid of density d3 on the sphere is
A flat rectangular l × b loop and a long straight wire lie in the same plane (see figure). Current in the wire varies according to I = I0 sinωt. The amplitude of emf induced in the loop is (Given b = 2a) Figure: a long straight vertical wire on the left carrying current I upward, and a flat rectangular loop of length l and breadth b to its right. The near edge of the loop is at a distance a from the wire.
There are two concentric and coplanar coils of radii R1 and R2 (R1 >> R2), and number of turns N1 and N2 respectively. The current in the second (smaller) coil is changing at a constant rate dI2/dt = k. The magnitude of induced emf in the first (larger) coil will be Figure: two concentric coplanar circular coils, the inner coil of radius R2 and the outer coil of radius R1.
A beam of light in air is incident at an angle of incidence i = 75° on a large block made of three parallel layers of different transparent materials stacked on top of each other, as shown. The thickness of each layer is t = 10.0 cm. Refractive indices of the three successive layers with respect to air are n1 = 2.40, n2 = 2.00 and n3 = 1.50 respectively. The beam of light emerges from the third medium on the X axis at a distance ξ from O. The value of ξ is Figure: three horizontal layers stacked on top of each other, each of thickness t: n1 = 2.40 on top, n2 = 2.00 in the middle, n3 = 1.50 at the bottom, with air above and below. A ray enters from the air at an angle of incidence i = 75° to the vertical, and the X axis runs along the bottom surface of the third layer with its origin O below the entry point.
A uniform rod AB of weight W is symmetrically suspended with the help of two identical un-stretchable light strings (1) and (2) of equal length from a rigid horizontal support. The rod is horizontal. The tension in the string (1), immediately after the string (2) is burnt, would be Figure: a uniform rod AB suspended horizontally by two identical vertical strings (1) on the left and (2) on the right, hanging from a rigid horizontal support.
Speed of sound is measured in a confined gas and found to be 0.632 times the RMS velocity (Vrms) of the gas molecules as determined from the temperature. The degree of freedom f and molar heat capacity CV at constant volume of the gas are
In a wide container, water is always filled up to a height h. There is a nozzle (hole) of radius r0 at its bottom. For some distance below the nozzle, water falls in a laminar stream. Radius r of stream as a function of y below the nozzle is expressed as [ignore the viscosity of water] Figure: a wide container kept filled with water up to a height h, with a nozzle (hole) of radius r0 at its bottom. The water stream falls a distance y below the nozzle.
A point object of mass m starts moving from rest along x axis from the origin, under the action of a force which delivers a constant power P. The position x of the object at time t is
A black body, maintained at absolute temperature T, is emitting radiations of wavelength λ with maximum (peak) intensity. The emitted photons are capable of exciting the electron in a Bohr-model hydrogen atom from ground state (Eg = -13.60 eV) to the third excited state. Using Wien's constant b = 2.90 × 10-3 mK, the estimated value of temperature T is nearly
In order to form standing waves in a medium, the following two waves are superposed: y1 = A sin π(5x + 100t + 0.8) and y2 = A sin π(5x - 100t). The variables x and y are in meter and t in second. The correct statement is that the
The density ρ of a solid sphere, of mass M and radius R, varies radially according to ρ = ρ01 - r2R, where ρ0 is a constant. The moment of inertia of this sphere about a diameter is I = αMR2 with a equal to
A concave mirror of radius of curvature R = 1.00 m is placed on the floor as shown. A small, light-weight ball falls from a height h = 1.20 m vertically along the principal axis towards the mirror. If the ball loses 16% of its energy after each collision with the mirror, the distance between the ball and its image formed by the mirror, when the ball reaches its maximum height after the 2nd collision, is nearly Figure: a concave mirror of radius of curvature R = 1.00 m placed on the floor like a bowl, with a small ball above it at a height h on the principal axis (shown by a dashed vertical line).
The magnetic field vector in a plane electromagnetic wave is given by B = 2 × 10-7 sin(kx + ωt)ĵ T. It is given that speed of wave is c = 3.00 × 108 ms-1 and ω = 1.50 × 1011 s-1
An astronomical telescope is used to view an object of size 4 cm kept at a distance of 20 m. The focal lengths of the objective and the eyepiece are 80 cm and 5 cm respectively. The final image is 25 cm from the eyepiece (with the eye close to the eyepiece). Statement 1: The size of the final image is 1.0 cm. Statement 2: The angular magnification is numerically 20
A thin metal plate of infinite length extending in positive y direction carries a current of current density J all along its length as shown. The very small thickness of the plate is t. The breadth (much larger than thickness) of the plate lies exactly along the x axis. The magnetic field produced at a small distance 'a' above and very close to the surface of the plate is Figure: a thin metal plate of infinite length extending in the positive y direction, of breadth along the x axis and very small thickness t. The current density J flows along the plate in the +y direction. Coordinate axes x, y and z are shown.
A uniform rod of mass M and length L is hinged freely on a horizontal peg at a variable distance ξ from one of its ends, so as to execute SHM with small angular amplitude in a vertical plane about the horizontal axis with time period T. If the minimum value of its time period Tmin = 1.0 second, the approximate value of L is
P and Q are two smooth weightless pulleys attached to the ceiling as shown. An un-stretchable, light string passes over both the pulleys. A weight W = 40 kg, resting on the floor, is tied to one end of the string. A ball of mass 20 kg is attached, at the other end A. The string PA is deflected by angle θ0 when the ball A is released from rest. The ball at the end A is capable of just lifting up the weight W for the value of θ0 Figure: two smooth weightless pulleys P (left) and Q (right) attached to the ceiling. A light string passes over both pulleys. A ball A hangs from the string at the left end, deflected by an angle θ0 from the vertical (shown dashed), and a weight W rests on the floor at the right end, tied to the string over pulley Q.
The position vector r of a particle of mass m moving in XY plane is given as a function of time by r = R(ωt - sin ωt)î + R(1 - cos ωt)ĵ where R and ω are positive constants. The particle is momentarily at rest when
A thin circular disk of mass m and radius R can rotate freely in a vertical plane about a pivot P on its rim (as in the figure). It is released when its centre is at C1 at the level of the pivot in a vertical plane. The speed of the lowest point of the disk when the centre is vertically below the pivot P at C2 is Figure: a thin circular disk pivoted at a point P on its rim. The dashed circle shows the disk with its centre at C1, level with the pivot P; the solid circle shows the disk with its centre at C2, vertically below P.
Two rectangular blocks of masses m and 2m are held against a massless compressed spring within a box of mass 3m and length 4L. The box as well as the two blocks are free to move on a horizontal frictionless surface along the x-axis. Just when the blocks leave contact with the spring, each block is at a distance L from the wall of the box in front of it and the centre of the box is at origin x = 0 (see figure). When released, each block moves its own way, collides with the front wall and immediately sticks to it. The position of the centre of the box in the process shifts to Figure: a box of mass 3m and length 4L on a horizontal surface. Inside, a block of mass m on the left and a block of mass 2m on the right are held against a compressed spring at the centre. Each block is at a distance L from the wall in front of it, and the centre of the box is at x = 0.
A charge q is uniformly distributed over the surface of a thin circular disk of radius R. The disk rotates about its own axis with an angular velocity ω rad/s, maintaining its axis normal to a uniform magnetic field B. The magnitude of the torque acting on the charged disk is
A line source L (perpendicular to the plane of the paper) emitting light of wavelength 5625 Å is placed 1.00 m away directly in front of the slit S1 in an opaque wall (see figure). A second slit S2 in the same wall is parallel to slit S1 and at distance d from it; both the slits are parallel to each other and to the line source L. Intensity of light is measured at the position P, equidistant from each of the slits S1 and S2 on the screen, for three different conditions. When S2 is covered it is I1, when S1 is covered it is I2. When both slits are open it is I. If I = I1 + I2, the distance d between the two slits is Figure: a line source L on the left, an opaque wall with two slits S1 (upper) and S2 (lower) at a distance d apart, and a screen on the right with a point P equidistant from the two slits.
1H3 and 2He3 have almost same atomic mass. 1H3 contains one proton, one electron and 2 neutrons while 2He3 has two protons, two electrons and one neutron. Knowing that the mass of a neutron is slightly greater than that of the proton, the estimation of the nuclear binding energy in the two cases reveals that
Part A-2 Questions (12) - Multi Correct
Each question has four options, of which any number (1, 2, 3 or 4) may be correct. You get 6 marks only if all the correct options are marked and no incorrect option is marked. Select all correct options, then press Check Answer.
Charge Q is distributed in non-uniform but spherically symmetric manner with charge density ρ(r) such that ρ(r) = ρ0(1 - rR) for r ≤ R, and ρ(r) = 0 for r ≥ R. The correct statement(s) is/are
More than one option can be correct. Select all correct options, then press Check Answer.
A proton of mass m is released from rest at x0 = αβ and starts moving along x axis under the influence of a conservative force F(x). Its potential energy function is U(x) = αx2 - βx, where α and β are positive constants. Rigorous calculations predict that
More than one option can be correct. Select all correct options, then press Check Answer.
A long horizontal thin metal wire under tension is attached at one end to a vibrator, which causes transverse oscillations in the wire when the other end of the wire is fastened rigidly. The vibration produces a travelling wave in the wire, which is described by y = y0sinπ(αt - βx), where x is measured in meter along the wire from the vibrator end. Here α and β are known positive constants. The linear density of the wire is μ kg/m. Then
More than one option can be correct. Select all correct options, then press Check Answer.
Two non-conducting solid spheres (1) and (2), with uniformly distributed charge throughout their volumes, are held at positions A and B, as shown in the figure. Each sphere has radius R. The centers A and B of the spheres (1) and (2) lie on x axis with the point of contact O at the origin. Given that the total charge on sphere (1) is Q and the electric field E at point P R2, 0 is zero. The correct statement(s) is/are Figure: two solid spheres (1) and (2), each of radius R, touching at the origin O. Sphere (1) has centre A at (-R, 0) and sphere (2) has centre B at (R, 0). The point S is at (-R/2, 0) inside sphere (1) and the point P is at (R/2, 0) inside sphere (2).
More than one option can be correct. Select all correct options, then press Check Answer.
Two moles of a mixture of a monoatomic gas and a diatomic gas are being used as the working substance in a reversible Carnot cycle as shown in figure. For the mixture of gases, the value of γmixture = CP/CV = 32. The cycle operates between the source temperature 600 K and the sink temperature 300 K. The highest and lowest pressures during the cycle are 1600 kPa and 100 kPa. The correct statement(s) is/are Figure: a P-V diagram of the Carnot cycle. A(P1, V1) to B(P2, V2) is an isotherm at T1 = 600 K, B to C(P3, V3) is an adiabat, C to D(P4, V4) is an isotherm at T2 = 300 K, and D back to A is an adiabat.
More than one option can be correct. Select all correct options, then press Check Answer.
In the circuit shown, E is the emf of an ideal battery. Capacitor C is initially uncharged. Switch S is closed at time t = 0. The time dependent current through the resistances R1 and R2 are I1 and I2 respectively. At any moment t, the charging current through the capacitor is IC(t). Choose correct option(s) Figure: a circuit with an ideal battery E and a switch S in series with a resistor R1. After R1, a capacitor C and a resistor R2 are connected in parallel. The currents are I1 through R1, IC through the capacitor and I2 through R2.
More than one option can be correct. Select all correct options, then press Check Answer.
In the given circuit, the emf E of the battery is 16 V and its internal resistance is r = 1.5 Ω. The correct option(s) is/are Figure: a circuit with a battery E = 16 V of internal resistance 1.5 Ω, in series with a resistor X = 2 Ω, feeding a network between junctions A (top) and C (bottom). Between A and C there are two balanced Wheatstone bridges: a left branch of 6 Ω + 12 Ω, a middle 10 Ω resistor to junction B, and a right network with 1 Ω, 2 Ω, 8 Ω, 4 Ω and 2 Ω resistors joining A, B and C.
More than one option can be correct. Select all correct options, then press Check Answer.
A train, moving in a straight line with an initial speed u ms-1 at t = 0, is given a constant acceleration 'a' ms-2 to attain a maximum speed Vm = 7u3. The driver runs the train at that maximum speed for some duration and then decelerates at a rate of 'a' ms-2 to attain the same initial speed u ms-1 at t = T. The average speed of the train for the entire journey (from time t = 0 to t = T) is 2u. Choose the correct statement(s)
More than one option can be correct. Select all correct options, then press Check Answer.
A rectangular block of mass M projected up an inclined plane, set at an angle θ with the horizontal, comes to a stop at a certain height and slides back down the incline. The down trip takes exactly twice as long as the up trip. The observations reveal that Figure: a rectangular block of mass M on an inclined plane set at an angle θ to the horizontal.
More than one option can be correct. Select all correct options, then press Check Answer.
A wire loop OABC, with corners at O (0, 0), A (L, 0), B (L, L) and C (0, L) lying in XY plane, carries a current I in anti-clockwise direction as shown. The correct statement(s) is/are Figure: a square wire loop OABC in the XY plane, with O at the origin, A at (L, 0), B at (L, L) and C at (0, L). The current I flows anticlockwise: O to A to B to C to O, as shown by arrows.
More than one option can be correct. Select all correct options, then press Check Answer.
A rocket is fired from Earth at 60° to the local vertical with an initial speed v0 = √(gR) where R is radius of the Earth and g is the acceleration due to gravity at the surface of the Earth. Choose correct option(s) [Assume the Earth to be a uniform solid sphere. Also ignore the rotation of the Earth]
More than one option can be correct. Select all correct options, then press Check Answer.
A uniform magnetic field B = 0.5 T exists in a circular region of radius R = 5 m. A wire loop of radius R = 5 m completely encloses the magnetic field at t = 0. The loop is pulled at uniform speed v = 2 ms-1 in the plane of the paper as shown. Figure: a uniform magnetic field B = 0.5 T exists in a circular region (dashed circle, marked with crosses) of radius R = 5 m. A wire loop of the same radius (solid circle) completely encloses the field region at t = 0 and is pulled to the right at a uniform speed v = 2 ms-1, so the two circles move apart.
More than one option can be correct. Select all correct options, then press Check Answer.
Related
NSE Exam 2026-27: Complete Guide (NSEP, NSEC, NSEB, NSEA, NSEJS) - Dates, eligibility, pattern, syllabus and registration for all five NSE papers.
Indian Association of Physics Teachers (IAPT) - The official body that conducts NSEP and publishes the official answer key and results.
Frequently Asked Questions
Download NSEP 2026 PDFs
Download the full NSEP 2026 question paper (Code 63) and the step-by-step solutions as PDFs.
Question Paper
All 60 questions from the NSEP 2026 paper, Code 63, held on 22 November 2026.
Download NSEP 2026 Question Paper (PDF)Solutions
Answer key with a short step-by-step method for every question.
Download NSEP 2026 Solutions (PDF)Tags








