JEE Main Rigid Body Dynamics PYQs 2024, 2025 and 2026: All Questions with Solutions
JEE Main Rigid Body Dynamics PYQs 2024, 2025 and 2026: All Questions with Solutions
Verified JEE Main Rigid Body Dynamics questions from 2024, 2025 and 2026, shift by shift. The 2024, 2025 and 2026 sets are interactive now: pick an option or enter a number and check instantly. Attempt timed, check the method only after answering, and log every miss by pattern.
How to use this quiz
1. Attempt one year timed, without looking at the method.
2. Click an option, or type a number and press Check, for instant right or wrong feedback.
3. Read the short method only after answering, then log the miss by pattern.
4. Rework your weak patterns the same day, then reattempt the year.
2024 Questions (16)
Four particles each of mass 1kg are placed at four corners of a square of side 2 m. Moment of inertia of system about an axis perpendicular to its plane and passing through one of its vertex is ____ kgm2. A square with a particle at each corner and a curved arrow at the top-right corner showing rotation about that vertex.

A ring and a solid sphere roll down the same inclined plane without slipping. They start from rest. The radii of both bodies are identical and the ratio of their kinetic energies is 7x where x is ____.
A heavy iron bar of weight 12 kg is having its one end on the ground and the other on the shoulder of a man. The rod makes an angle 60° with the horizontal, the weight experienced by the man is : A. 6 kg B. 12 kg C. 3 kg D. 6 √(3) kg
A cylinder is rolling down on an inclined plane of inclination 60°. It's acceleration during rolling down will be x√(3) m / s2, where x= ____ (use g=10 m / s2 ).
A body of mass 5 kg moving with a uniform speed 3 √(2) ms−1 in X-Y plane along the line y=x+4. The angular momentum of the particle about the origin will be ____ kgms−1.
Consider a Disc of mass 5kg, radius 2m, rotating with angular velocity of 10rad/s about an axis perpendicular to the plane of rotation. An identical disc is kept gently over the rotating disc along the same axis. The energy dissipated so that both the discs continue to rotate together without slipping is ____ J.
Two discs of moment of inertia I1=4 kg m2 and I2=2 kg m2 about their central axes & normal to their planes, rotating with angular speeds 10 rad / s & 4 rad / s respectively are brought into contact face to face with their axe of rotation coincident. The loss in kinetic energy of the system in the process is ____ J.
A solid circular disc of mass 50" " kg rolls along a horizontal floor so that its center of mass has a speed of 0.4" " m/s. The absolute value of work done on the disc to stop it is ____ J
Two identical spheres each of mass 2 kg and radius 50 cm are fixed at the ends of a light rod so that the separation between the centers is 150 cm . Then, moment of inertia of the system about an axis perpendicular to the rod and passing through its middle point is x20 kg m2, where the value of x is ____ .
A body of mass ' m ' is projected with a speed ' u ' making an angle of 45° with the ground. The angular momentum of the body about the point of projection, at the highest point is expressed as √(2) m u3Xg. The value of 'X' is ____.
A uniform rod AB of mass 2 kg and Length 30 cm at rest on a smooth horizontal surface. An impulse of force 0.2Ns is applied to end B. The time taken by the rod to turn through at right angles will be πx S, where x = ____.
A solid sphere and a hollow cylinder roll up without slipping on same inclined plane with same initial speed v . The sphere and the cylinder reaches upto maximum heights h1 and h2, respectively, above the initial level. The ratio h1: h2 is n10. The value of n is ____ .
Ratio of radius of gyration of a hollow sphere to that of a solid cylinder of equal mass, for moment of Inertia about their diameter axis AB as shown in figure is √(8x). The value of x is: ____ A. 37 B. 17 C. 67 D. 51 Left: a hollow sphere of radius R with diameter axis AB. Right: a solid cylinder of radius R and length 4R with axis AB through the centre of its left face, perpendicular to the cylinder axis.

If the radius of earth is reduced to three-fourth of its present value without change in its mass then value of duration of the day of earth will be ____ hours 30 minutes.
A string is wrapped around the rim of a wheel of moment of inertia 0.40 kgm2 and radius 10 cm . The wheel is free to rotate about its axis. Initially the wheel is at rest. The string is now pulled by a force of 40 N . The angular velocity of the wheel after 10 s is xrad / s, where x is ____.
A heavy iron bar, of weight W is having its one end on the ground and the other on the shoulder of a person. The bar makes an angle θ with the horizontal. The weight experienced by the person is: A. W2 B. W C. W cos θ D. W sin θ
UPO
Unique PYQs Only. Solve only what is new.
✓4,348 unique PYQs
✓Repeated questions grouped in clusters
PYQ Express
Every JEE Main PYQ in one place.
✓10,000+ PCM PYQs
✓Physics, Chemistry, Maths
2025 Questions (29)
The position vectors of two 1 kg particles, (A) and (B), are given by rA=(α1 t2 î+α2 t ĵ+α3 t k̂) m and rB=(β1 t î+β2 t2 ĵ+β3 t k̂) m, respectively; (α1=1 m / s2, α2=3 n m / s, α3=2 m / s, β1=2 m / s, β2=-1 m / s2, β3=4 p m / s), where t is time, n and p are constants. At t=1 s,|VA|=|VB| and velocities VA and VB of the particles are orthogonal to each other. At t=1 s, the magnitude of angular momentum of particle (A) with respect to the position of particle (B) is √(L) kgm2 s−1. The value of L is ____ .
A uniform circular disc of radius 'R' and mass 'M' is rotating about an axis perpendicular to its plane and passing through its centre. A small circular part of radius R/2 is removed from the original disc as shown in the figure. Find the moment of inertia of the remaining part of the original disc about the axis as given above. A. 932 MR2 B. 1732 MR2 C. 1332 MR2 D. 732 MR2 A disc of radius R with a circular part of radius R/2 removed, the removed circle touching the outer rim on the right.

The torque due to the force (2 î+ĵ+2 k̂) about the origin, acting on a particle whose position vector is (î+ĵ+k̂), would be A. î+k̂ B. ĵ+k̂ C. î-k̂ D. î-ĵ+k̂
A solid sphere of mass ' m ' and radius ' r ' is allowed to roll without slipping from the highest point of an inclined plane of length ' L ' and makes an angle 30° with the horizontal. The speed of the particle at the bottom of the plane is v1. If the angle of inclination is increased to 45° while keeping L constant. Then the new speed of the sphere at the bottom of the plane is v2. The ratio v12: v22 is A. 1 : 3 B. 1:√(3) C. 1:√(2) D. 1 : 2
A circular disk of radius R meter and mass M kg is rotating around the axis perpendicular to the disk. An external torque is applied to the disk such that θ(t)=5 t2-8 t, where θ(t) is the angular position of the rotating disc as a function of time t. How much power is delivered by the applied torque, when t=2 s ? A. 72 MR2 B. 8 MR2 C. 108 MR2 D. 60 MR2
An object of mass 'm' is projected from origin in a vertical xy plane at an angle 450 with the x-axis with an initial velocity v0 . The magnitude and direction of the angular momentum of the object with respect to origin, when it reaches at the maximum height, will be [g is acceleration due to gravity] A. mvO34√2 g along positive z-axis B. mvO34√2 g along negative z-axis C. mvo32√2 g along positive z-axis D. mvO32√2 g along negative z-axis
A uniform solid cylinder of mass 'm' and radius 'r' rolls along an inclined rough plane of inclination 45º. If it starts to roll from rest from the top of the plane then the linear acceleration of the cylinder's axis will be A. 1√2 g B. √2 g C. √2 g3 D. 13√2 g
A solid sphere is rolling without slipping on a horizontal plane. The ratio of the linear kinetic energy of the centre of mass of the sphere and rotational kinetic energy is: A. 34 B. 25 C. 43 D. 52
A solid sphere and a hollow sphere of the same mass and of same radius are rolled on an inclined plane. Let the time taken to reach the bottom by the solid sphere and the hollow sphere be t1 and t2, respectively, then A. t1=t2 B. t1>t2 C. t1 < t2 D. t1=2 t2
Two iron solid discs of negligible thickness have radii R1 and R2 and moment of intertia I1 and I2, respectively. For R2 = 2R1, the ratio of I1 and I2, would be 1/x, where x = _____.
The moment of inertia of a solid disc rotating along its diameter is 2.5 times higher than the moment of inertia of a ring rotating in similar way. The moment of inertia of a solid sphere which has same radius as the disc and rotating in similar way, is n times higher than the moment of inertia of the given ring. Here, n = ____. Consider all the bodies have equal masses.
A uniform rod of mass 250 g having length 100 cm is balanced on a sharp edge at 40 cm mark. A mass of 400 g is suspended at 10 cm mark. To maintain the balance of the rod, the mass to be suspended at 90 cm mark, is A. 300 g B. 290 g C. 190 g D. 200 g
The coordinates of a particle with respect to origin in a given reference frame is (1,1,1) meters. If a force of F = î - ĵ + k̂ acts on the particle, then the magnitude of torque (with respect to origin) in z-direction is ______ .
Three equal masses m are kept at vertices ( A, B, C ) of an equilateral triangle of side a in free space. At t=0, they are given an initial velocity VA=V0 A C, VB=V0 B A and VC=V0 C B. Here, A C, C B and B A are unit vectors along the edges of the triangle. If the three masses interact gravitationally, then the magnitude of the net angular momentum of the system at the point of collision is: A. 32 amV0 B. 12 a mV0 C. 3 am0 D. √(3)2 amV0 An equilateral triangle ABC of side a.

Moment of inertia of a rod of mass 'M' and length 'L' about an axis passing through its center and normal to its length is 'α'. Now the rod is cut into two equal parts and these parts are joined symmetrically to form a cross shape. Moment of inertia of cross about an axis passing through its center and normal to plane containing cross is : A. α /4 B. α /2 C. α D. α /8
A cord of negligible mass is wound around the rim of a wheel supported by spokes with negligible mass. The mass of wheel is 10 kg and radius is 10 cm and it can freely rotate without any friction. Initially the wheel is at rest. If a steady pull of 20 N is applied on the cord, the angular velocity of the wheel, after the cord is unwound by 1 m, would be : A. 10 rad/s B. 30 rad/s C. 20 rad/s D. 0 rad/s A wheel of radius R with a cord wound round its rim, pulled down by a 20 N force.

A square Lamina OABC of length 10 cm is pivoted at 'O'. Forces act at Lamina as shown in figure. If Lamina remains stationary, then the magnitude of F is: A. 20 N B. 10 N C. 10√2 N D. 0 Square lamina OABC of side 10 cm with 10 N forces at the corners and a force F at C.

A wheel of radius 0.2 m rotates freely about its center when a string that is wrapped over its rim is pulled by force of 10 N as shown in figure. The established torque produces an angular acceleration of 2 rad / s2. Moment of intertia of the wheel is ____ kgm2. (Acceleration due to gravity =10 m / s2 ) A wheel hung from a support with a string wrapped over its rim, pulled down by a 10 N force.

The moment of inertia of a circular ring of mass M and diameter r about a tangential axis lying in the plane of the ring is : A. 38 M r2 B. 32 M r2 C. 2 M r2 D. 12 M r2
A force of 49 N acts tangentially at the highest point of a sphere (solid) of mass 20 kg , kept on a rough horizontal plane. If the sphere rolls without slipping, then the acceleration of the center of the sphere is A. 3.5 m/s2 B. 0.25 m/s2 C. 2.5 m/s2 D. 0.35 m/s2 A solid sphere on a rough horizontal plane with a 49 N force acting tangentially at its highest point.

A circular ring and a solid sphere having same radius roll down on an inclined plane from rest without slipping. The ratio of their velocities when reached at the bottom of the plane is √(x5) where x = __________
Which of the following are correct expression for torque acting on a body? A. τ = r × L B. τ = ddt(r × p) C. τ = r × dpdt D. τ = Iα E. τ = r × F (r = position vector; p = linear momentum; L = angular momentum; α = angular acceleration; I = moment of inertia; F = force; t = time) Choose the correct answer from the options given below: [ Note : This questions marked as BONUS by NTA] A. A, B, D and E Only B. C and D Only C. B, D and E Only D. B, C, D and E Only
If L and P represent the angular momentum and linear momentum respectively of a particle of mass 'm' having position vector as r = a(îcos ω t + ĵsin ω t). The direction of force is A. Opposite to the direction of r B. Opposite to the direction of P C. Opposite to the direction of L × P D. Opposite to the direction of L
A solid sphere with uniform density and radius R is rotating initially with constant angular velocity (ω1) about its diameter. After some time during the rotation its starts loosing mass at a uniform rate, with no change in its shape. The angular velocity of the sphere when its radius become R / 2 is x ω1. The value of x is ____ .
A wheel is rolling on a plane surface. The speed of a particle on the highest point of the rim is 8 m / s . The speed of the particle on the rim of the wheel at the same level as the centre of wheel, will be : A. 4 √(2) m / s B. 8 √(2) m / s C. 8 m / s D. 4 m / s
A, B and C are disc, solid sphere and spherical shell respectively with same radii and masses. These masses are placed as shown in figure. The moment of inertia of the given system about PQ axis is x15I, where I is the moment of inertia of the disc about its diameter. The value of x is ____. A disc A on top and a solid sphere B and spherical shell C below it, all three touching, with vertical axis PQ through the centre of A.

M and R be the mass and radius of a disc. A small disc of radius R / 3 is removed from the bigger disc as shown in figure. The moment of inertia of remaining part of bigger disc about an axis A B passing through the centre O and perpendicular to the plane of disc is 4x MR2. The value of x is ____ . A big disc of radius R with a small disc of radius R/3 removed, the small disc centre O' at a distance 2R/3 from O; axis AB passes through O perpendicular to the disc.

A thin solid disk of 1 kg is rotating along its diameter axis at the speed of 1800 rpm . By applying an external torque of 25 π Nm for 40 s , the speed increases to 2100 rpm . The diameter of the disk is ____ m .
A rod of linear mass density ' λ ' and length ' L ' is bent to form a ring of radius ' R '. Moment of inertia of ring about any of its diameter is. A. λ L38 π2 B. λ L34 π2 C. λ L316 π2 D. λ L312
JEE Mates
Online Mock Test Series.
✓50 online mock tests
✓Video solutions + analysis
UTS
Ultimate Test Series.
✓20 full mocks + 6 special tests
✓Projected percentile after every test
2026 Questions (22)
Two identical thin rods of mass M kg and length L m are connected as shown in figure. Moment of inertia of the combined rod system about an axis passing through point P and perpendicular to the plane of the rods is x12 ML2 kg m2. The value of x is ____. A vertical rod of mass M and length L standing on a horizontal rod of mass M and length L, point P at the top of the vertical rod.

A uniform rod of mass m and length l suspended by means of two identical inextensible light strings as shown in figure. Tension in one string immediately after the other string is cut, is ____ (g acceleration due to gravity) A. m g / 2 B. m g / 4 C. m g / 3 D. mg Horizontal rod AB of length l suspended by two vertical strings from a ceiling, one at each end.

The pulley shown in figure is made using a thin rim and two rods of length equal to diameter of the rim. The rim and each rod have a mass of M. Two blocks of mass of M and m are attached to two ends of a light string passing over the pulley, which is hinged to rotate freely in vertical plane about its center. The magnitudes of the acceleration experienced by the blocks is ____ (assume no slipping of string on pulley). Question figure: pulley with a thin rim and two crossed rods, blocks of mass m on the left and M on the right hanging from a string over the pulley. Options image: four acceleration expressions labelled (1) to (4): (1) (M-m)g/[(13/6)M + m], (2) (M-m)g/(M + m), (3) (M-m)g/[(8/3)M + m], (4) (M-m)g/(2M + m).


Two cars A and B each of mass 103kg are moving on parallel tracks separated by a distance of 10 m, in same direction with speeds 72km/ h and 36 km/h. The magnitude of angular momentum of car A with respect to car B is ____ J.s. A. 3.6 × 105 B. 105 C. 3 × 105 D. 2 × 105
A circular disc has radius R1 and thickness T1. Another circular disc made of the same material has radius R2 and thickness T2. If the moment of inertia of both discs are same and R1R2=2 then T1T2=1α The value of α is ____.
A solid sphere of mass 5 kg and radius 10 cm is kept in contact with another solid sphere of mass 10 kg and radius 20 cm . The moment of inertia of this pair of spheres about the tangent passing through the point of contact is ____ kg · m2. A. 0.36 B. 0.72 C. 0.18 D. 0.63
Two masses m and 2 m are connected by a light string going over a pulley (disc) of mass 30 m with radius r=0.1 m. The pulley is mounted in a vertical plane and it is free to rotate about its axis. The 2 m mass is released from rest and its speed when it has descended through a height of 3.6 m is ____ m / s. (Assume string does not slip and g=10 m / s2 )
A uniform bar of length 12 cm and mass 20 m lies on a smooth horizontal table. Two point masses m and 2 m are moving in opposite directions with same speed of v and in the same plane as the bar, as shown in figure. These masses strike the bar simultaneously and get stuck to it. After collision the entire system is rotating with angular frequency ω. The ratio of v and ω is: A. 32 B. 2 √(88) C. 66 D. 33 Horizontal bar 12 cm long; a 2m mass strikes 2 cm left of the centre moving down and an m mass strikes 4 cm right of the centre moving up.

Two small balls with masses m and 2 m are attached to both ends of a rigid rod of length d and negligible mass. If angular momentum of this system is L about an axis (A) passing through its centre of mass and perpendicular to the rod then angular velocity of the system about A is ____. A. 32 Lm d2 B. 2 Lm d2 C. 43 Lm d2 D. 2 L5 m d2
The moment of inertia of a square loop made of four uniform solid cylinders, each having radius R and length L(R<L) about an axis passing through the mid points of opposite sides, is (Take the mass of the entire loop as M ): Four moment-of-inertia expressions labelled (1) to (4): (1) (3/8)MR2 + (7/12)ML2, (2) (3/4)MR2 + (1/6)ML2, (3) (3/4)MR2 + (7/12)ML2, (4) (3/8)MR2 + (1/6)ML2.

Suppose there is a uniform circular disc of mass Mkg and radius rm shown in figure. The shaded regions are cut out from the disc. The moment of inertia of the remainder about the axis A of the disc is given by x256 M r2. The value of x is ____ . A disc of radius r with two shaded circular cut-outs of radius r/4, their centres (3/4)r from the disc centre and 135 degrees apart; axis A is a vertical dashed line through the disc centre.

Two masses 400 g and 350 g are suspended from the ends of a light string passing over a heavy pulley of radius 2 cm . When released from rest the heavier mass is observed to fall 81 cm in 9 s . The rotational inertia of the pulley is ____ kg · m2 ·( g=9.8 m / s2) A. 9.5 × 10−3 B. 4.75 × 10−3 C. 1.86 × 10−2 D. 8.3 × 10−3
A uniform solid cylinder of length L and radius R has moment of inertia about its axis equal to I1. A small co-centric cylinder of length L/2 and radius R/3 carved from this cylinder has moment of inertia about its axis equals to I2. The ratio I1 / I2 is ____ .
A thin uniform rod (X) of mass M and length L is pivoted at a height (L3) as shown in the figure. The rod is allowed to fall from a vertical position and lie horizontally on the table. The angular velocity of this rod when it hits the table top, is ____ . (g = gravitational acceleration) A. √(32 gL) B. 3√(2) √(gL) C. 1√(2) √(gL) D. √(3 gL) A vertical rod X pivoted at a point L/3 above a table, with 2L/3 of the rod above the pivot.

A solid sphere of radius 10 cm is rotating about an axis which is at a distance 15 cm from its centre. The radius of gyration about this axis is √(n) cm. The value of n is ____.
Two circular dises of radius each 10 cm are joined at their centres by a rod of length 30 cm and mass 600 gm as shown in figure. If the mass of each disc is 600 gm and applied torque between two discs is 43 × 105 dyne. cm , the angular acceleration of the discs about the given axis A B is ____ rad / s2. A. 22 B. 11 C. 100 D. 27 Two discs of radius 10 cm joined at their centres by a 30 cm rod; axis AB is vertical, 10 cm from the left disc centre and 20 cm from the right disc centre.

Moment of inertia about an axis A B for a rod of mass 40 kg and length 3 m is same as that of a solid sphere of mass of 10 kg and radius R about an axis parallel to A B axis with separation of 3 m as shown in figure below. The value of R is given as √(α2). The value of α is ____ . A horizontal rod of mass 40 kg and length 3 m with axis AB vertical through its right end; below it a solid sphere of radius R whose centre is 3 m from AB, rotating about a vertical axis through its centre.

A solid sphere of mass M and radius R is divided into two unequal parts. The smaller part having mass M / 8 is converted into a sphere of radius r and the larger part is converted into a circular disc of thickness t and radius 2 R. If I1 is moment of inertia of a sphere having radius r about an axis through its centre and I2 is the moment of inertia of a disc about its diameter, the ratio of their moment of inertia I2 / I1= ____ . A. 35 B. 70 C. 140 D. 210
An object of uniform density rolls up the curved path with the initial velocity v0 as shown in the figure. If the maximum height attained by an object is 7 v0210 g( g= acceleration due to gravity), the object is a ____ . A. solid cylinder B. ring C. disc D. solid sphere
A solid sphere of radius 4 cm and mass 5 kg is rotating (rotation axis is passing through the centre of the sphere) with an angular velocity of 1200 rpm . It is brought to rest in 10 s by applying a constant torque. The torque applied and the number of rotations it made before it comes to rest are ____ and ____ respectively. A. 0.128 π Nm, 100 B. 0.0128 π Nm, 50 C. 0.128 π Nm, 50 D. 0.0128 π Nm, 100
A solid sphere (A) of mass 5 m and a spherical shell (B) of mass m , both having same radius, are placed on a rough surface. When a force of same magnitude is applied tangentially at the highest points of A and B, they start rolling without slipping with an acceleration of aA and aB, respectively. The ratio of aA and aB is ____ . A. 5 : 21 B. 6 : 10 C. 21 : 25 D. 1 : 5
A solid cylinder having radius R and length L is slipping on a rough horizontal plane. At time t=0 the cylinder has a translational velocity v0=49 m / s, perpendicular to its axis and a rotational velocity v0 / 4 R about the centre. The time taken by the cylinder to start rolling is ____ seconds. (coefficient of kinetic friction μK=0.25 and g=9.8 m / s2 ) A. 15 B. 5 C. 10 D. 7.5
Physics PYQ Book
JEE Main 5 Years Physics PYQ Book 2022-2026.
✓Chapter-wise solved papers
✓Detailed solutions
JEE Advanced Online
Online Mock Test Series.
✓10 online mock tests
✓Video solutions + analysis
Frequently Asked Questions
Tags











